|
08-15-2015, 12:40 AM | #3 | ||||||
|
Thanks, Dean. Barrels are not serialed to the gun. Previous owner replaced the original damaged barrels. I think you're right about the hook & screw being missing. Difficult parts to find? I plan to take it to a good smith for a thorough look-see but I'm very interested in Parker owners experiences in shooting with Damascus barrels.
|
||||||
08-15-2015, 07:27 AM | #4 | ||||||
|
I shoot Damascus barreled Parkers almost exclusively... With appropriate loads of course. And a lot of members here do also.
|
||||||
The Following User Says Thank You to Dean Romig For Your Post: |
08-15-2015, 08:16 AM | #5 | ||||||
|
Could you show a few more pics of the receiver I would like to see any engraving. I'm so
|
||||||
08-15-2015, 11:48 AM | #6 | ||||||
|
Dean, what loads would work best with this 12g #2?
|
||||||
08-15-2015, 12:06 PM | #7 | ||||||
|
That's something that shouldn't be answered until the barrels have been checked for safe min. wall thickness for their entire length. Remember, the thinnest spot must pass muster.
|
||||||
More VH 12G #2 Pics |
08-15-2015, 12:37 PM | #8 | ||||||
|
More VH 12G #2 Pics
Mike, Here are a few more pics of the receiver.
|
||||||
08-15-2015, 12:45 PM | #9 | ||||||
|
I agree, Dean. Any idea what that safest minimum standard is? ...Never mind, I found that info-min. barrel thickness in forward 2/3 is .025 inch and rear 1/3 is .090 inch according to FAQ web page.
Last edited by William Graves; 08-15-2015 at 04:49 PM.. Reason: Question answered |
||||||
The Following User Says Thank You to William Graves For Your Post: |
|
|