![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
a good one dennis... craig pete lester tried this with is ten ga even posted the results..the spreaders will make a tight full choke into a light modified..works great... charlie
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | |||||||
|
![]() Quote:
Touche !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
The X-Stream inserts sold by Ballistic Products opened the pattern in my Rem '94 10ga from 93% to 57% at 40 yards. I used the same components with a 1 1/8 #6 but adding the X-Stream insert. The pattern was relatively even, the choke is .046.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | |||||||
|
![]() Quote:
At present with the W&C I'll shoot 23 or 24 in a round of skeet with the gun but it's generally a big ink ball in the sky when you hit with that gun . So I usually load 1 1/4 ounce with a 16 gauge 1/4" wad in the bottom of the SP-10 shotcup and an overshot wad . I can either leave the wads and reduce to 1 1/8 or take out the two wads and stay at 1 1/4 ounces shot ? Actually the idea of dropping to 1 1/8 sounds pretty good .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|