Visit Brian Dudley's homepage! | |
11-18-2011, 01:07 PM | #3 | ||||||
|
internal left hammer parts, springs and screws for the hammer, firing pins too.
|
||||||
11-18-2011, 01:49 PM | #4 | ||||||
|
Tom Carter is making hammer screws out of tool steel and Dave Pernell is making offset firing pins also out of good tool steel. Both do an excellent job and cheep to boot!
David |
||||||
11-18-2011, 02:19 PM | #5 | ||||||
|
Yeah, contact Dave Purnell about the firing pin and maybe the other parts. He may be able to help you out on them.
__________________
B. Dudley |
||||||
11-18-2011, 02:43 PM | #6 | ||||||
|
Never heard that "story" before.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
11-18-2011, 04:44 PM | #7 | ||||||
|
That could be true, but I believe Parker did not waste material like that, The lifter was in use for a long time and parts would be needed by the owners of these fine lifters, just my two cents worth!
|
||||||
11-18-2011, 05:19 PM | #8 | ||||||
|
I agree Gary.... Yankees are just too darn frugal....
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
Thread Tools | |
Display Modes | |
|
|