What do you use to wipe down your guns?

[ken larson]

ANYONE TRIED CLENZOIL???

[Setter Man]

I have used Clenzoil and in fact I forgot that I have a bottle. Clenzoil is a very good product that can be used on every part, inside and out. It's a relatively lightweight oil, similar to Hoppe's. My canister of Balistol is no-aresol and it's much heavier than Clenzoil and Hoppe's.

As for Hoppe's, I know of no one who does not appreciate the versatility and smell of Hoppe's. I'll probably go out and pick up a can of that next week.

The point is to do something, almost religiously, as part of the care for our firearms.

[Pa SxS]

In the past I've used Rem Oil or similar gun oil to wipe the metal. It really doesn't matter as long as you apply any quality oil after shooting. I'm intrigued by the guys that feel they have to turn their muzzles down when storing the gun for fear of getting oil into the head of the stock. If they get oil seeping into the stock head, they are using way too much oil on the receiver.

I recently bought a can of Balistol, not the spray. I shoot a Beretta 391 in the winter and those semi-auto's sure do build up the carbon. I applied the Balistol fairly thickly on the dirty parts, waited about 1/2 hr and started cleaning. I was amazed at how Balistol just turned that carbon to sludge. Made cleaning the 391 easy!

[Setter Man]

I'm not a chemist but is it good to use an oil as a protectant that can de-sludge a gun or is that just the nature of oils?

[Jeff K.]

I have used clenzoil for years. I like the fact that it doesn't hurt the wood.
Gary,
I know others that love Preserve oil. Most are on their last bottles and can't find any more.

[Blind Dog]

I put 3'n1 in the gun case bottle for the BHE 'cause Parker recommended it. Otherwise it's Rem Oil, Hoppes #9, or, as Big D mentioned, RIG for the exterior on a peice of paper towel, or, if a little "oxydation", on a piece of 0000 steel wool.

[Brush Buster]

I sent a gun up to Miller Trigger " Daniel May " to have a repair done a while back ,and the oil he wiped the gun down with when he sent it home took me right back to being 12 years old again ,if Dan is reading this post ,maybe he will chime in on what it is they use ! I would buy a Five Gallon Jug !

[Wild Skies]

I had been using Rem Oil for many years, but about 3 years ago I began hearing about the qualities if Eezox. So I did some research and am now convinced there is not a better product on the market for gun care than Eezox and have been using it exclusively ever since. Eezox cleans, lubricates and prevents rust. When applied properly it is dry in seconds so you don't have to be concerned about the laws of gravity and soaking into the head of the stock if you store your guns upright. It doesn't harm wood or finishes and you don't leave finger prints when touching the metal.

Take a look at these test results, as it's a real eye opener:
http://www.6mmbr.com/corrosiontest.html

[Big Friend Ten (BFT)]

Originally Posted by Greg Baehman

I did some research and am now convinced there is not a better product on the market for gun care than Eezox...

Take a look at these test results, as it's a real eye opener:
http://www.6mmbr.com/corrosiontest.html

Greg,

Those controlled test results are pretty convincing! For those who have not clicked the link above which Greg provided, you should!

Mark

[Double Lab]

Originally Posted by Greg Baehman

I had been using Rem Oil for many years, but about 3 years ago I began hearing about the qualities if Eezox. So I did some research and am now convinced there is not a better product on the market for gun care than Eezox and have been using it exclusively ever since. Eezox cleans, lubricates and prevents rust. When applied properly it is dry in seconds so you don't have to be concerned about the laws of gravity and soaking into the head of the stock if you store your guns upright. It doesn't harm wood or finishes and you don't leave finger prints when touching the metal.

Take a look at these test results, as it's a real eye opener:
http://www.6mmbr.com/corrosiontest.html

Great info on that link Greg. Thanks as it was really an eye opener.