|
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
10-01-2019, 11:37 AM
|
#3 | ||||||
|
Yes the same should have the separate plastic base wad .
Honestly , at that pressure , I don't think it would matter which hull you put in. Unless you want low pressure , then I would stick with the straight walled hulls. |
||||||
|
|
||||||
 |
 |
 |
| The Following User Says Thank You to Mark Garrett For Your Post: |
|
|
|
10-04-2019, 01:49 PM
|
#4 | ||||||
|
Good luck finding the DR 16 wad, there was a fire or something at the factory, and seem to be out of stock from my sources, but they are working on it. I am out of them
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Harold Lee Pickens For Your Post: |
|
|
|
11-06-2019, 03:25 PM
|
#5 | ||||||
|
I use RST Cheddite Hulls with SG-17 wads, 7/8 load and 19.0 grains of Universal powder. Velosity should be about 1125 with PSI of about 7,000. I've found this load with # 7 shoot to be very effective on Pheasant and Sharptail over pointing dogs.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to George Davis For Your Post: |
|
|
|
11-06-2019, 07:42 PM
|
#6 | ||||||
|
SG-16 Wads
Poor typing on my part |
||||||
|
|
|
||||||
|
|
|
|
|
|
11-06-2019, 09:53 PM
|
#7 | ||||||
|
7/8 oz shot is great in several gauges
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Mills Morrison For Your Post: |
|
|
|
11-10-2019, 05:22 PM
|
#8 | ||||||
|
Based on the loads in that range that I've had tested you should be plenty safe and at something under 9K psi. Nice loads!
Edit to say they are most likely <8K psi and maybe under 7K. I shouldn't speculate tho. The load I was comparing to (in my head) used the smaller Remington hull which generates somewhat higher pressure than the more spacious Cheddite hulls. Carry on! Last edited by Dave Erickson; 11-13-2019 at 09:13 AM.. |
||||||
|
|
|
||||||
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode