![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
As you recall Scot, you and I have previously discussed the unique feature of the SSS having chrome lining through the choke area. I was not aware, however; that the geometry through the chokes of the SSS differed from those of standard models. Would you expound on this a little more please?
__________________
Wild Skies Since 1951 |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | |||||||
|
![]() Quote:
The SSS's chokes begin about 2-1/2" behind the muzzle and the taper is more abrupt (or vise/versa w/the D grade). I'll see if I can't find my notes. If not, I'll do some more measuring and update this post. Small sample of course but.. |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Dean, it appears to me both sides of the subject guns BTFE are sloped down at the front. I don't see anything showing there was damage to the left side specifically..just different from other BTFE's, it appears. Am I missing something indicative of damage on the left side?
Here are 2 pics of two different BTFE's The subject gun and a second photo from another ad (handsome gun btw). The BTFE I own on a 12ga is straight like the 2nd photo. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
From my experience, they're all straight like the second gun.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dean Romig For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Actually, the sell price is the indicator of the market.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
I'd be interested in the subject gun if it were not priced well beyond what it is worth. Just my opinion of course.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Gary Laudermilch For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
I wasn't able to find my notes so, out came the bore gauge for a quick check. It’s important to understand - hard numbers mean nothing (i.e., bore diameter / constriction) Geometry is the key.
The standard 12ga D grade chokes begin just shy of 2” from the muzzle. They slowly taper over the entire length of the choke. No straight section whatsoever. There is no chrome on the chokes. My corresponding SSS chokes begin 2-9/16+ from the muzzle. They taper consistently until the choke straightens out. The last 3/8”+ is straight until the choke reaches the muzzle. The chokes are chrome-lined. I didn't measure in a fashion to calculate actual taper per inch. Clearly, this is a very small sample and should not be construed as being reflective of all Parker Reproductions - just what is in front of me. That said, I will quantify my comparison by sharing that my D-grade is s/n 12-00176. My SSS is s/n 12SS-00176. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 3 Users Say Thank You to Scot Cardillo For Your Post: |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
That in itself qualifies as a near miracle!
__________________
Wild Skies Since 1951 |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|