Brass .410 cases

[ArtS]

Originally Posted by Arthur Shaffer

When I was looking for some brass cases not too long ago, I wnet to their website and there was absolutely no mention of a brass shotgun shell anywhere, even using their internal search function. I have seen more new ones pop up at Midway etc since but they are likely inventory moving through the system.

Forgot to add that The Gun Works/Muzzleloading Emporium has all gauges Magtech in stock. One of note is they have 16 gauge on special for $30 a box. I bought a few boxes to have around. I will use them if I work up BP loads in 16.

[oskar]

I used to use 444 Marlin in my Stevens 410 sxs. One chamber was large enough that fire 410 shells would not size down enough, so I used 444 Marlin and they didn't swell much and the FL marlin dies sized them right down. I had a gasket punch that cut the right size wads. I might have the dies around yet, I've made four moves since the last time I looked for them.

[charlie cleveland]

art smokeless powder works good too....keep pressure on the wads when hot glueing them down on top wad...and real tight wads are nessary on black and smokeless...I use a little black powder about a 1/2 grain over the primer for the smokeless no duds this way....charlie

[6pt-Sika]

I just saw some ideas for 410 brass . I’d heard in the past before about using 444 Marlin brass for 2 1/2” and I just recently saw a guy say he uses 9.3x74R brass for 410 3” . It’s a thought but I’d suggest before buying the stuff I’d google the heck out of it .

[ArtS]

Originally Posted by charlie cleveland

art smokeless powder works good too....keep pressure on the wads when hot glueing them down on top wad...and real tight wads are nessary on black and smokeless...I use a little black powder about a 1/2 grain over the primer for the smokeless no duds this way....charlie

I mentioned the other day somewhere that the only thing different about a large pistol and a large rifle primer is a few thousanths in length. I have used a primer pocket conditioner reamer in large rifle size to condition all the magtech cases I have used. They really need it along with a hit with a bevel reamer to make them load easier. With that I can use a large or magnum primer, and never any duds.

[William Davis]

Rocky Mt was a regular supplier to single shot rifle shooters. I used them breech seating 32/40 & 38/55. Cases turned from bar stock, RMC would make about anything straight wall. They perform different than drawn cases. Expand don’t spring back much. They were inconsistent too, due to various grades brass used.

Owners sold the business some time ago & suspect new owners are selling inventory.

William