Parker weights

[Mike Stahle]

Marcus,

So sorry for hijacking your thread :-(
This is some good info. :-))

[Marcus Jacobs]

Thanks for the reply,Larry.My GH has 3lb.6oz. barrels,and straight grain wood,and obviously no ejectors.I haven't had the chance to measure bore diameter and wall thickness,however I have noticed that muzzle walls are very thin,and gun hasn't been shot that much,so barrels are probably struck fairly thin. Anyway,thanks for the info.This Parker site is really topnotch.I wish there was one for W.&C. Scott guns,as they are my first love. Best Regards, Marcus

[Austin W Hogan]

It looks to me like that scale reads 6 pounds 13 ounces. I have a DH 28 inch barrel gun that weighs within an ounce of that , on a 1 1/2 frame. I don't think you will have worries about scrawny barrels at that weight, but a twelve ga gun less than 6 3/4 pounds is not a pleasure to shoot.

Best, Austin

[Double Play]

Originally Posted by Austin W Hogan

It looks to me like that scale reads 6 pounds 13 ounces. I have a DH 28 inch barrel gun that weighs within an ounce of that , on a 1 1/2 frame. I don't think you will have worries about scrawny barrels at that weight, but a twelve ga gun less than 6 3/4 pounds is not a pleasure to shoot.

Best, Austin

You are right Austin, a sub seven pound 12 gage would not be my choice for a hundred rounds on the sporting clays course but to bring a few Kansas phesants to bag it works just fine.

[Dean Romig]

Larry, I love that sweet little twelve of yours.

[Bruce Day]

Barrel thickness is your leading hand.

We have lots of threads here on barrel thickness. Its generally considered that you need at least .025 9" in and .010 at the chambers. Some of the light frame 12's weren't far from that when new so if they are honed .008, then its below what most people like. The thicker the wall thickness, the less you need to worry about pressure.

[Mike Stahle]

Originally Posted by Bruce Day

Barrel thickness is your leading hand.

We have lots of threads here on barrel thickness. Its generally considered that you need at least .025 9" in and .010 at the chambers. Some of the light frame 12's weren't far from that when new so if they are honed .008, then its below what most people like. The thicker the wall thickness, the less you need to worry about pressure.

Honed .008 ???
Wow!! I am indeed into a whole new world here.
Alright, what do I need to do to be sure this shotgun
is safe to shoot and with what ammo?
Thanks :-)

[Dean Romig]

Originally Posted by Bruce Day

Its generally considered that you need at least .025 9" in and .010 at the chambers.

Probably a 'typo' in there someplace

[Autumn Daze]

Could it be .100 at the chambers?....

[Harry Collins]

I have two #1 frame Parkers and no scale to weigh them. Austin is correct on these light guns and four boxes of shell. Even a 1 oz load at 1150 fps will wear on me. When I shoot sporting clays with these Parkers it is with 7/8 oz @ 1150 fps. Totally enjoyable and effective...

Harry