Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Looking at some data - even though it's for 2 3/4 you may be able to use it. In a Rem hull with a Rem primer and either 9.5grs of Nitro 100 or 10.5 of Solo 1000 gives 7500psi at 1030fps. They use a WAA wad with a .135 hard card inside. I assume it's because only a 3/4oz load is in it. I'm guessing, but think without the .135 card everything would fit in a 2 1/2" shell. In a Fed hull they show 11grs of Solo and a Fed primer - same wad combo. Good luck - Paul
Threaded Mode