 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account!
To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
11-03-2012, 06:46 PM
|
#1
|
Member
|
|
|
|
Member Info
|
Join Date: Sep 2011
Posts: 1,774
Thanks: 639
Thanked 2,600 Times in 931 Posts
|
|
Joe:
Chances are you'll be fine. British proof minimum for 2 3/4 inch chambers is .140 just ahead of the forcing cone before extending the chamber. And Parkers generally run quite heavy in the barrel wall department. BTW... you need a wall thickness mic/gauge to check things.
Best, Kensal
|
|
|
|
|
11-03-2012, 06:54 PM
|
#2
|
|
Member
|
PGCA Lifetime
Member Since
Second Grade
|
|
Member Info
|
Join Date: Jun 2009
Posts: 17,360
Thanks: 7,289
Thanked 10,911 Times in 5,704 Posts
|
|
We know of at least one ten gauge Parker that was made at the factory on a #1 frame and many #1 frame 12 gauges were chambered for 2 3/4" shells. Most #1 frame V Grade guns were late guns that left the factory with 2 3/4" chambers or nearly so. If you like it, buy it.
|
|
|
|
|
Hybrid Mode