1. You know at the outset that a 1901 gun is extremely unlikely to have correct Sk and Sk chokes. You know its either bored out or cut from 28's to have those chokes. Most guns from that period had 3-4" choke constrictions, so if they are cut 28's, you should have some choke.
2. Although not in the SN book, you know at the outset that a research letter is available, and people often contact Mark ( tele from roster) to get the specs before they buy a gun. Get a research letter and then you will know.
3. Its not at all uncommon that barrels will have been dropped at some point and the muzzles dented. The muzzles are often ground ( dressed) to take out the dent. If the rib end has a very narrow end space, as many do, the space can be ground out. Look at the rib keels. Are they intact? Its not very difficult to grind out 1/16 or 1/8 to take out a dent. Even so, the keels should still be intact.
4. Butt heavy can be an indicator of cut barrels but not necessarily. Just as waterfowlers sometimes wanted muzzle heavy guns, upland game hunters sometimes wanted butt heavy for a fast swing. I have one like that. Not all Parkers were balanced at the hinge.
Last edited by Bruce Day; 12-02-2009 at 07:16 PM..
|
Threaded Mode