 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account!
To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
|
|
|
11-16-2011, 08:41 PM
|
#1
|
Member
|
|
|
|
Member Info
|
Join Date: Jun 2010
Posts: 1,465
Thanks: 1,553
Thanked 577 Times in 319 Posts
|
|
The '10A' brass shell has the same outside diameter as the modern paper hull. My 1879 Lifter has very little difference between the chamber diameter and bore diameter, due to the thin 'A' brass shell. The '10B' brass shell is smaller in outside diameter than the 'A' brass and paper hulls. I have dozens of brass shells in my collection. I will put together some photos to show the differences. Basically, the 'A' chamber will take W.R.A. Co. 10 gauge brass, E. Remington 10 gauge brass, UMC 10A brass, REM-UMC 10 brass and paper hulls (old and new). The 'B' chamber will only handle the '10B' brass shell. You are correct in regards to the wad sizes, Forrest. Manufacturers of reloading components carried wads in numerous sizes to accomodate different bores. My 1879 Lifter has '10A' chambers with bores of .808". A thin walled brass shell with 9 gauge wads would be perfect in my gun.
__________________
GMC(SW)-USN, Retired
'Earnest Will'
'Desert Shield'
'Desert Storm'
'Southern Watch'
|
|
|
|
The Following User Says Thank You to Mark Landskov For Your Post:
|
|
|
|
|
|
|
11-17-2011, 07:06 AM
|
#2
|
|
Member
|
|
|
|
Member Info
|
Join Date: Sep 2009
Posts: 120
Thanks: 43
Thanked 75 Times in 21 Posts
|
|
Quote:
Originally Posted by Mark Landskov
The '10A' brass shell has the same outside diameter as the modern paper hull. My 1879 Lifter has very little difference between the chamber diameter and bore diameter, due to the thin 'A' brass shell. The '10B' brass shell is smaller in outside diameter than the 'A' brass and paper hulls. I have dozens of brass shells in my collection. I will put together some photos to show the differences. Basically, the 'A' chamber will take W.R.A. Co. 10 gauge brass, E. Remington 10 gauge brass, UMC 10A brass, REM-UMC 10 brass and paper hulls (old and new). The 'B' chamber will only handle the '10B' brass shell. You are correct in regards to the wad sizes, Forrest. Manufacturers of reloading components carried wads in numerous sizes to accomodate different bores. My 1879 Lifter has '10A' chambers with bores of .808". A thin walled brass shell with 9 gauge wads would be perfect in my gun.
|
Thank you for posting this information, this certainly clears things up. I would love to know what the dimensions are of a "B" hull, both inside and out. I've lathe turned a bunch of the "A" configured hulls for use in my gun, but have never examined a "B" hull to record the dimensions.
|
|
|
|
|
Hybrid Mode