Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Have your gunsmith make a set of split steel steel blocks that fit the barrel od, like a clamp, place the clamps on the barrel and useing a press on the blocks to push the dent back in ,Any heating on those soft solder barrels is asking for a big bill to resolder ribs back together, I have done several barrels this way , you can contact me at jlyons1@comcast.net
Last edited by jack lyons; 10-10-2009 at 12:09 PM..
Reason: poor spelling
Threaded Mode