Steve's new GH

[10 bore]

Originally Posted by Steve McCarty

Barrels look pretty thick. I don't know what the chokes are. I'm thinking about having it bored mod and skeet, which will work for clays I think. Both muzzles look the same size. It's probably Full and Full. Don't know. A dime sets the same in both and doesn't fall in. All of my other old doubles are Full and Mod and I shoot modern shells in them. Here I'll reload my own, but first I'll buy some Polywad or RST's. Nor do I know the length of the chamber. If it is short I'll just shoot 2.5 inch shells in it. Unique. That's neat.

Looks like the bead has been pounded down flatish. I may replace it with ivory. First I have to have the cocking mechanism repaired. Has a little too much drop maybe, but the LOP seems perfect. Haven't measured it yet. I just brought it home.

Paid $999 for the old Parker. I think I did okay. No chips or serious dings, nice bore a little case color, nice damascus colors, looks like plenty of steel in the barrels. These Parker shotguns are very neat, aren't they!

the bead is factory, it is perfect, i would not change it,

[Stepmac]

Originally Posted by scott kittredge

the bead is factory, it is perfect, i would not change it,

Thank you. I won't mess with the bead. It is a 2 frame. I didn't post a picture of the water table. It's pretty devoid of marks. A lug on the bottom of the barrels also is marked with a "2". So are three digits of the serial number.

Where the shooter's fingers rubbed against the barrels, just over the forearm, the barrel's are rubbed silver. The rest of the barrels show nice black and silver/white demascus pattern. The serial numbers along the bottom tang are nearly worn smooth. This gun was shot a lot! But well cared for.

Steve