Steve's new GH

[Steve McCarty]

Originally Posted by Ed Blake

You did great. Nice gun. In regards to the chokes, leave them as they are and shoot it before you take that step. Then decide. There are some great published 7/8 oz. Low pressure loads. Easy on the gun and you

I'm going to have the chamber measured. You say "published 7/8 ounce loads". I assume you are alluding to loading my own. I guess, if it is short that I'll load Cheddite hulls. If the chambers are short, I'll shoot short shells. Do standard shotshell manuals quote low psi loads?

[StubTwist]

Originally Posted by Steve McCarty

Do standard shotshell manuals quote low psi loads?

You can check online from the powder manufacturer.

http://www.hodgdon.com/basic-manual-inquiry.html

My target load is: Remington STS hull; Remington 209 primer; Claybuster 1100 wad; 23 grains of IMR 7625; 1 oz of shot. 5100PSI 1150 fps velocity.