The Short Ten - How many shooting one?

[Nathan Ikert]

Originally Posted by calvin humburg

Les not that Ive found we trim them with some members tool 3/4 dowell with X-acto knife blade stuck in it if you haven't seem it hollar and I'll put pictures on. who ever figured it out is "double barrel smart" ch

Post a picture please.

[10 bore]

Originally Posted by Nathan Ikert

Post a picture please.

put a sheet rock screw in the center bottom of dowel and you can fine tune the cut by screwing in or out from 2 5/8ths 10 ga to 2 7/8ths 10 ga

[J.B. Books]

Originally Posted by scott kittredge

put a sheet rock screw in the center bottom of dowel and you can fine tune the cut by screwing in or out from 2 5/8ths 10 ga to 2 7/8ths 10 ga

Scott is right, the screw is must, it allows one to quickly adjust the depth for various hulls, new Federal vs. old Federal, Remmington, Winchester etc. They are all different and the cutter must be adjusted to hit the same desired length with each hull type.