Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Ed, can you give your reloading info for the 7/8 oz loads?
I bought the DR TGT 12 wads and Remington primers to try the 7/8 oz load they have on their web site. I have quite alot of RXP shells to use although I usually load only Federal components.
Per the Alliant web site
RXP hull
Rem primer
DR TGT 12 wad
7/8 oz shot
17 gr Clay Dot = 1200fps and 6490psi
17.5 = 1250fps and 6910psi
18.5 = 1310fps and 7770psi
Threaded Mode