Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Thank you for the offer. I'll try to get the dimensions of the plunger locking screws. The Firing pins and return springs are fine (I think). It looks like the plunger locking screws are bent where they fit into the groove of the firing pin from dry firing which also explains why I had a heck of a time getting them to come out. I used some old stuff that I had called "rust buster" but will try kroil and turpentine.
Jack Kuzepski
The Following User Says Thank You to Jack Kuzepski For Your Post:
Threaded Mode