Information on 10 gauge frame size 4?

[6pt-Sika]

What’s the serial number ?

[Zac Gallus]

Serial is 50279

[6pt-Sika]

Originally Posted by ZacharyGallus

Serial is 50279

That number isn’t in the serialization book . I’ve had two 4 frame 10’s the first was an 0 grade 34” and the one I have at present is a Grade 3 32” both are top lever hammer guns .

[Zac Gallus]

Originally Posted by CraigThompson

That number isn’t in the serialization book . I’ve had two 4 frame 10’s the first was an 0 grade 34” and the one I have at present is a Grade 2 32” both are top lever hammer guns .

The one I got is also a Grade 2 top lever hammer but not sure on the length. Will measure when I get home

[Bill Murphy]

We are getting comments from more than one poster. "Bottom of the barrel" does not describe the location of the frame number marking. The bottom of the rear locking lug is the location of the frame number. The "locking lug" is in the middle of the two barrels.

[Zac Gallus]

Originally Posted by Bill Murphy

We are getting comments from more than one poster. "Bottom of the barrel" does not describe the location of the frame number marking. The bottom of the rear locking lug is the location of the frame number. The "locking lug" is in the middle of the two barrels.

Sorry, that's what I meant. The "4" is on on the barrel lug as shown on the Technical Information page on this website.

[Double Lab]

Where exactly is this 4 located?

[6pt-Sika]

Originally Posted by Daryl Corona

Where exactly is this 4 located?

Bottom of the barrel lug .

[Bill Murphy]

You will have to provide pictures of the gun in question for us to provide information. Providing markings, all of them, from the gun will be a good start. Where, exactly, is the "4" stamped on your gun? A picture would help if you are not familiar with the parts of the gun.

[edgarspencer]

The numeral stamped on the bottom of the rear lug will indicate the frame size. The numeral stamped on the back corner of the right barrel flat would indicate the grade.