Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I use a smaller brazing rod to measure the correct depth then cut them to length. I drill the hole with a tight clearance bit. The grooves with the epoxy in them does all the gripping you need. You could cut the tip and screw them into a smaller hole.
The Following User Says Thank You to Arthur Shaffer For Your Post:
Threaded Mode