Question for M Koneski-8ga reloading

[Mike of the Mountain]

Originally Posted by Craig Larter

I sent off a 8ga load to Tom yesterday for testing and will post the results. Win Hull, 24gr Clays, 1/8" 8ga nitro card over powder, 1/2" fiber wad 8ga, Gualandi Hi-Capacity, 1 1/2oz 7 1/2 lead, fold crimp.

You might have to use a hard fiber wad under the Gualandi. We found that with lower pressure loads we needed the hard wads to keep the pressure from being too low. That said, we’ve been loading 23.8g of Clays in the 1.5 oz loads with great results so your 24g test loads should work well.

[6pt-Sika]

Originally Posted by Mike Koneski

You might have to use a hard fiber wad under the Gualandi. We found that with lower pressure loads we needed the hard wads to keep the pressure from being too low. That said, we’ve been loading 23.8g of Clays in the 1.5 oz loads with great results so your 24g test loads should work well.

No leading or minimal leading ? Or are you using the paper sleeve around the shot as well ?

[Mike of the Mountain]

Originally Posted by CraigThompson

No leading or minimal leading ? Or are you using the paper sleeve around the shot as well ?

Not concerned with leading. If I load for longer shots I use a plastic sleeve inside the wad and around the shot to hold it together a split second longer for a tighter pattern at distance.

[Mike of the Mountain]

FYI folks, I have 12 new loads with different powders and fold crimps all chronograph tested and ready to send to Tom. One load has the 8g Nitro Card and 8g 1/4” fiber wad UNDER the Gualandi wad to hold more of the shot inside the petals. I also have 4 loads to send that are roll crimped. They should be in the Part II article in the Fall issue of Parker Pages. That is all for now. Stay tuned. Same bat time, same bat channel.