Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Not recommending it on an expensive gun, but I have solved this problem on several cheap Belgian guns by chucking a new square edged cylindrical fine grit stone in a Dremel tool and running it at a slow speed around the rim recess with the shaft parallel to the barrel. It often solves the problem without leaving any marks on the recess except for a shiny path. Often the needed treatment is extremely minor.
Hybrid Mode