Quote:
Originally Posted by Bill Murphy
How do you do that, Edgar? Is it done on the loader or by hand?
|
I use a Lee Powder dipper that gives me 1/4oz, drop that on top of a brush wad, then 28ga OS card, another 1/4 oz, etc. I only have a 9000 for 28, so I take then hull out after putting in the brush wad, and dropping the charge bar weight of 3/4 oz, dump that, then put it back in under the crimp starter. It would be a lot easier on a 600Jr, but I don't have one set up for 28ga.
My normal wad would be the Fiocchi RO-28, and I could do the same if I used a 32ga OS card.
Hybrid Mode