28 gauge spreader load

[edgarspencer]

Jay Oliver turned me onto using the BP Brush wad for spreader effect. I tried separating the shot up into 3 sections with overshot cards. Seems to open it up a fair bit. I'm using 13grs. 20/28 in 2 1/2" Fiocchi hulls.

[Bill Murphy]

How do you do that, Edgar? Is it done on the loader or by hand?

[edgarspencer]

Originally Posted by Bill Murphy

How do you do that, Edgar? Is it done on the loader or by hand?

I use a Lee Powder dipper that gives me 1/4oz, drop that on top of a brush wad, then 28ga OS card, another 1/4 oz, etc. I only have a 9000 for 28, so I take then hull out after putting in the brush wad, and dropping the charge bar weight of 3/4 oz, dump that, then put it back in under the crimp starter. It would be a lot easier on a 600Jr, but I don't have one set up for 28ga.
My normal wad would be the Fiocchi RO-28, and I could do the same if I used a 32ga OS card.