 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
05-01-2024, 09:22 AM
|
#1
|
Member
|
PGCA Lifetime Member Since Second Grade
|
Member Info
|
Join Date: Jun 2009
Posts: 17,365
Thanks: 7,292
Thanked 10,913 Times in 5,706 Posts
|
|
We at least know the 26" barrels match the Serialization Book. Great gun if the wood to metal fit is tight and the barrels are spotless on the inside and measure correctly. .665 to .667 with choke at the muzzle.
|
|
|
|
 |
New User Help with Valuation |
 |
05-01-2024, 01:18 PM
|
#2
|
Member
|
|
|
Member Info
|
Join Date: Apr 2024
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
New User Help with Valuation
Hi Harold and Bill. Thanks so much for your replies. Very helpful. I will check the bbl choke diameters. I do know that all of the parts are matching serial #s. Do you know what the stock length should be so I can try to determine if it's been cut? And to Bill's comment about the tight fit between wood and metal - it's very tight and clean. The bores are also shiny and bright.
I do truly appreciate your help. I reached out to PGCA because in my review of the Parker section on Blue Book of Gun Values it was clear that valuing a Parker is not nearly as straight forward as valuing most firearms and estimating % condition. Thanks again.
Rick
|
|
|
|