Help with a hammerless double barrel teardown

[Dean Romig]

Yup, that stock is junk...

Regarding cleaning, my go-to method is to use a sonic cleaning tank with the correct solvent (one that will not ignite) and let it sit in it for at least 6 hours. More iterations may be necessary but this is the method I use for cruddy internals. I use Big45 Frontier pads externally.





.

[David Noble]

Chris, here is a link on the PGCA FAQ section on how to disassemble a Parker shotgun.
https://parkerguns.org/pages/faq/FAQ...yWithPhoto.htm

[Chris Wren]

Originally Posted by David Noble

Chris, here is a link on the PGCA FAQ section on how to disassemble a Parker shotgun.
https://parkerguns.org/pages/faq/FAQ...yWithPhoto.htm

Thank you!

[Mike of the Mountain]

I will clean up an action like Dean, ultrasonic cleaner. Run it for hours, it won’t hurt anything. I use a 60/40 mix of Simple Green (60) and water (40). Afterwards I’ll carefully use compressed air to blow it off, then I’ll place it in a parts dryer (looks like a food dehydrator).