Quote:
Originally Posted by Brian Dudley
The unhooking slide inside the frame is stuck or gummed up. First try dry firing both barrels and see if that frees it. If not, the trigger plate will have to come off in order to get the barrels off.
And your hammerhead unit is a Trojan grade.
|
Ah, thank you for that information. That was one piece I was after.
As for the test. I tried dry firing and it did not free it up. The barrels feel a little looser, though. So I took the stock off and put liberal amount of oil in the.hammerhead. I am headed out now, but I plan on letting it sit for a bit and see if that helps. What I could see of the inside is fairly dirty, so it will need a good and thorough cleaning.
Thank you for your help.
Hybrid Mode