Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
off Alliant's web site back in 3/2000.
There are 3 wad combinations with the other components being the same:
Federal Paper Target hull, 7/8 oz. shot, Fed. 209 primer, 17.5 gr. RedDot, 1,200 FPS...
1. Win. WAA12F1 wad @ 4,800 PS| **(l use the Claybuster 1100-12 wad)
2. Rem. PT12 wad @ 5,000 PSI
3. Fed. 12SO wad @ 5,700 PSI
I cut the crimp off to 2 1/2”, use an overshot card and roll crimp to finish
Last edited by Randy Zimmer; 01-07-2024 at 07:55 PM..
Reason: Image would not load
Hybrid Mode