Stock loose from received

[David Champa]

Originally Posted by Steve Huffman

Before going the full route of removing the stock check the screws that go through the tang one on top and one under trigger guard maybe on has broken if you have never removed a stock from a Parker be very careful Check the parts breakdown on the homepage

Thanks! I checked those, the one under the trigger guard was slightly loose, I was able to tighten in 1/8-1/4 turn tighter. There’s still a bit of play, when holding the gun as you would when you’d shoot it, I and put a bit of opposing pressure on the forend and stock pistol grip it opens a bit of a gap next to the tang. I’m afraid I’ll have to take it apart to further inspect.