1886 D3 Two Barrel Set Received:

[Dean Romig]

Originally Posted by Bruce P Bruner

“Laminated”, I like the pattern. The signature Parker “mushroom” beads. Note the wall thickness at the muzzle on the Damascus set, .091 .260 at the breech. No wonder it’s over 11 pounds.

My GAWD look at those chokes on the Dam set!!!





.

[Bruce P Bruner]

Originally Posted by Dean Romig

My GAWD look at those chokes on the Dam set!!!
.

These tubes are begging for more than powder puff loads. I doubt that the original owner was interested in sporting clays. More like the wrath of a man concealed in a marsh, patiently awaiting the pending mayhem.

[Mike of the Mountain]

Originally Posted by Bruce P Bruner

These tubes are begging for more than powder puff loads. I doubt that the original owner was interested in sporting clays. More like the wrath of a man concealed in a marsh, patiently awaiting the pending mayhem.

And my favorite movie comes to mind....

[6pt-Sika]

Originally Posted by Bruce P Bruner

These tubes are begging for more than powder puff loads. I doubt that the original owner was interested in sporting clays. More like the wrath of a man concealed in a marsh, patiently awaiting the pending mayhem.

I think you may very well be correct ! And again the time worn phrase “if it were mine” I’d have it out patterning my handloaded #1 and #0 buckshot loads at about thirty yards from both barrels . Might even go so far as ordering a single cavity round ball mold from Tanner in the UK that was cut within a couple thousandths of the tightest barrel at the muzzle . That reminds me I have a Grade 3 top lever four frame 10 that’s never killed anything