bill I have loaded brass shells with smokeless powder before....I learned a few things first put 1 to 2 grains of black powder in the brass hull against the primer I just poured it into the brass hull then put your smokeless powder in on top of the black powder....finish up with 1/8 inch thick card wads better than the old hard fiber wad....then finish up with your lead shot...then put your thin wad over shot then I used a hot glue gun to seal my top wad while holding down pressure while glueing...I ve never had a misfire while using this method using a brass hull with smokeless powder in a brass hull....charlie
|
Threaded Mode