2 7/8" 10ga Reloading Data

[Randy Roberts]

I really like the load with the red rectangle around it which calls for 31 grains of Longshot in a Fed hull. Very low pressure load IMO. I have all the requirements of this recipe except the Fed hull. I have read on the forum where other members have stated that 10 gauge hulls (Rem, Fed, Ched) are all straight wall hulls and thus they will interchange recipes freely. What would the opinions be on using this recipe in a Rem or Ched 2 7/8" hull ?

[6pt-Sika]

Originally Posted by Randy G Roberts

I really like the load with the red rectangle around it which calls for 31 grains of Longshot in a Fed hull. Very low pressure load IMO. I have all the requirements of this recipe except the Fed hull. I have read on the forum where other members have stated that 10 gauge hulls (Rem, Fed, Ched) are all straight wall hulls and thus they will interchange recipes freely. What would the opinions be on using this recipe in a Rem or Ched 2 7/8" hull ?

I’ve not got any Longshot at the moment . I do however have WIN 572 I ‘ll try that at some point in a REM or RST/Cheddite hull .