I'd be scared of the glue-in-basewad, sounds like a disaster waiting to happen. We just had a member injured and base wad separation is a suspect. The Winchester primer I use is for both standard and magnum pistol loads. I use them in .41 mag and .44 mag loads as well as 10MM and .45ACP so I had them on hand when I ordered hulls. They ignite 14 gr. of Blue Dot just fine, thought I'd try then in the brass, had good results. Now, the only powder I've tried them on in brass shotshells is Longshot in a 10 ga. Can't speak for any
other powder, gauge, or combo.
I see no reason not to order the hulls with 209s in mind.
|
Threaded Mode