The year is almost 1/2 over, what Parkers have you adopted?

[6pt-Sika]

I thought I was going to get out of Hausemanns without any gun buying . However after shooting the main event Saturday , I was casing the tent one last time and stopped at Robin Hollows tables . A what appeared to be large frame Parker Grade 2 top lever caught my attention . It was a 10 32” on a 3 frame that I had thought on a 4 or possibly 5 frame . Anyway the gun had been restocked with a very nicely figured piece of dark walnut in straight grip and it had the correct trigger guard with serial number although certainly not original . The new stock has what I’d call trap/pigeon dimensions . While I was drooling the gentleman pulled out a second set of Belgian made fluid steel 10 gauge 3 1/2” 32” barrels that had Briley thin walls . So to make a long story short it followed me home . Saturday I got one of the chokes out and it was lite mod , the other was to tight so I got it out Monday snd it was IC so I got on the horn with Briley and a wrench along with an IM and F are headed my way .

[Dean Romig]

Originally Posted by CraigThompson

I thought I was going to get out of Hausemanns without any gun buying . However after shooting the main event Saturday , I was casing the tent one last time and stopped at Robin Hollows tables . A what appeared to be large frame Parker Grade 2 top lever caught my attention . It was a 10 32” on a 3 frame that I had thought on a 4 or possibly 5 frame . Anyway the gun had been restocked with a very nicely figured piece of dark walnut in straight grip and it had the correct trigger guard with serial number although certainly not original . The new stock has what I’d call trap/pigeon dimensions . While I was drooling the gentleman pulled out a second set of Belgian made fluid steel 10 gauge 3 1/2” 32” barrels that had Briley thin walls . So to make a long story short it followed me home . Saturday I got one of the chokes out and it was lite mod , the other was to tight so I got it out Monday snd it was IC so I got on the horn with Briley and a wrench along with an IM and F are headed my way .

I love that wood Craig! The color and figure are perfect for a hammer gun.

Here's a pin-lifter with similar wood.


.

[6pt-Sika]

Originally Posted by Dean Romig

I love that wood Craig! The color and figure are perfect for a hammer gun.

Here's a pin-lifter with similar wood.


.

Yours isn’t a restock correct ? I took the one I bought put it on my chariot drive to the truck got a box of 10 gauge 1 1/4 ounce then drove over to the Corona arcade and shot it in the Bo Whoop . It’s very pointable and if I do my part which is somtimey at best , it’ll reach out and crush targets !