20 ga turkey load

[Mike Bartlett]

I have been using #8 TSS 7/8oz and 1oz loads in my 12ga Parkers with damascus barrels for the past two years. With 2 3/4" shells using 16-16.4 grains of Red dot, a Remington STS primer, the pressure is 6100 PSI. The DH with D4, 30 in barrels weighs 8.4 pounds. I use a cut down wad for steel shot with a mylar sleeve and buffer in with the shot; there is virtually no recoil with this load at 1200 fps. #8 TSS is equal to #3 lead due to its density, no shot deformation and with much less frictional drag the patterns are exceptional. Further, when you hit a turkey with these loads the are dead. All the shot goes completely through the bird; they never kick or flap when you pick them up; stone dead. And, virtually no damage to the barrels. Devastating turkey and goose load.

[Greg Kratzner]

Michael,

I would be most interested in the exact particulars of these loads, Please

tried to PM but couldn't figure it out

Thanks in advance for your help

Originally Posted by Michael Bartlett

I have been using #8 TSS 7/8oz and 1oz loads in my 12ga Parkers with damascus barrels for the past two years. With 2 3/4" shells using 16-16.4 grains of Red dot, a Remington STS primer, the pressure is 6100 PSI. The DH with D4, 30 in barrels weighs 8.4 pounds. I use a cut down wad for steel shot with a mylar sleeve and buffer in with the shot; there is virtually no recoil with this load at 1200 fps. #8 TSS is equal to #3 lead due to its density, no shot deformation and with much less frictional drag the patterns are exceptional. Further, when you hit a turkey with these loads the are dead. All the shot goes completely through the bird; they never kick or flap when you pick them up; stone dead. And, virtually no damage to the barrels. Devastating turkey and goose load.