Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi, how do you finish closing the top of your load over the shot ?
Scott
I use a 4 pin roller for the plastic hulls. The all brass I just glue in an OS card.
The #6’s I cut my hull shorter before I crimped…
The #6 load is probably 2.5” overall length. I cut the #5 shot loaded hulls around 2 3/4” before I crimped. The brass hulls I cut down to approx 2 3/4”.
The Following 2 Users Say Thank You to Cory Rams For Your Post:
Threaded Mode