Finally set up the drill press for roll crimping

[William Davis]

I went to some effort to set my PW 375 to handle and star crimp 2 7/8 10 G. Its easier to preform all the size, prime, charge, insert wad &/drop shot operations on the PW. Then switch to the roll crimper final step. Ponsness Warrens final crimp is performed off the press anyway,.

William

[Keith Doty]

Originally Posted by William Davis

I went to some effort to set my PW 375 to handle and star crimp 2 7/8 10 G. Its easier to preform all the size, prime, charge, insert wad &/drop shot operations on the PW. Then switch to the roll crimper final step. Ponsness Warrens final crimp is performed off the press anyway,.

William

I went a similar path, some serious effort and a bit of machining to transform a Pacific 266 to run my short 10s on. I have 3 others set up for 20, 16, and 12. Been using one since high school and wanted to stay with the same press system. After much effort and some serious profanity I "got there". I'm now getting great 6 pt. star crimps when I want them and pull the loaded hulls off before crimping to roll crimp. I ended up building what amounts to a drill guide to use with a hand drill, works great. Been a labor of love but very satisfying in the end.

[Bill Murphy]

William Davis, why can't you finish the crimp (star crimp) on the 375? I can't get a good 10 gauge crimp on mine because I think I need a starter crimp. However, don't understand the need for a roll crimp. My empties are rough cut to 2 7/8 but from then on, things get difficult.