Wads and spacers for a short 10 load

[Milton C Starr]

Originally Posted by CraigThompson

Remington and red RST’s .

I had placed a order with BPI last week since they had the Cheddites listed as in stock but my order was canceled 2 days ago for whatever reason. I wanted to load up about 50 dove loads for the 10 ga. At least my order from Precision came in.

[6pt-Sika]

RST’s and REM’s same exact load in both . Both look decent both go boom both break or kill birds .

[ArtS]

Originally Posted by Milton C Starr

I had placed a order with BPI last week since they had the Cheddites listed as in stock but my order was canceled 2 days ago for whatever reason. I wanted to load up about 50 dove loads for the 10 ga. At least my order from Precision came in.

I had ordered some hulls and a couple of other things a month ago and they came in 3 days ago, apparently they sold out their inventory 4 weeks ago and just now gort it all shipped out. I'm not sure why they don't stop taking orders when they are fully committed.

[Milton C Starr]

Originally Posted by Arthur Shaffer

I had ordered some hulls and a couple of other things a month ago and they came in 3 days ago, apparently they sold out their inventory 4 weeks ago and just now gort it all shipped out. I'm not sure why they don't stop taking orders when they are fully committed.

Theyre the only place I have seen large size lead shot when the funds allow I will try placing another other but this time just for shot and see how it goes.
I think this would be the ticket for coyotes in the 8 and 10 ga

https://www.ballisticproducts.com/Su...uctinfo/SBK1T/

[ArtS]

Originally Posted by Arthur Shaffer

I had ordered some hulls and a couple of other things a month ago and they came in 3 days ago, apparently they sold out their inventory 4 weeks ago and just now gort it all shipped out. I'm not sure why they don't stop taking orders when they are fully committed.

I just checked this evening and they still show the 10 Ga Cheddites as available.

[Milton C Starr]

Originally Posted by Arthur Shaffer

I just checked this evening and they still show the 10 Ga Cheddites as available.

I tried ordering some but after a week they canceled my order I also had like 8 other things in the order perhaps on was out of stock and they canceled the whole order ? I just going to go with Federal hulls there seems to be more data on them and eveyone says if you can use the Federal hull thats the one to go with for the 10 gauge.

[ArtS]

I haven't been able to find any Federal hulls available anywhere.

RST does show once fired Cheddites in stock at $50/100. DOn't know the source but the ad reads like a one time thing.

[6pt-Sika]

Originally Posted by Milton C Starr

I just going to go with Federal hulls there seems to be more data on them and eveyone says if you can use the Federal hull thats the one to go with for the 10 gauge.

Okay in the first place evidently I’m not part of everyone ! In a four hull 10 gauge race Federal would be third only beating WIN . I prefer REM’s then the RST’s . And yes I’ve used Federals , while I have no issue with them they aren’t my preference . To be honest just use what you can get . I typically put the same basic load in all four brands of hulls . Learn to be adaptable , life’s to short to worry about having only one specific whatever when a whole bunch of different things can be used in the same capacity .

[J.B. Books]

Originally Posted by CraigThompson

Okay in the first place evidently I’m not part of everyone ! In a four hull 10 gauge race Federal would be third only beating WIN . I prefer REM’s then the RST’s . And yes I’ve used Federals , while I have no issue with them they aren’t my preference . To be honest just use what you can get . I typically put the same basic load in all four brands of hulls . Learn to be adaptable , life’s to short to worry about having only one specific whatever when a whole bunch of different things can be used in the same capacity .

The older RST 10ga hulls, (brown) were Federals, the newer RST hulls (red) are Cheddites. If you are using a MEC single stage that uses a resizing ring on the deprime station Federals take much less effort to resize because the they have a brass head whereas the others have steel heads. That is most likely a reason many people prefer Federal hulls.

[Milton C Starr]

Originally Posted by CraigThompson

Okay in the first place evidently I’m not part of everyone ! In a four hull 10 gauge race Federal would be third only beating WIN . I prefer REM’s then the RST’s . And yes I’ve used Federals , while I have no issue with them they aren’t my preference . To be honest just use what you can get . I typically put the same basic load in all four brands of hulls . Learn to be adaptable , life’s to short to worry about having only one specific whatever when a whole bunch of different things can be used in the same capacity .

There is a load that interest me particularly its a 1.5oz load @ 1150 fps 8300 psi I believe its the 24th load up from the bottom on page 2. I would like to try that in my 6 frame . There is also a 1.5oz bismuth load for bluedot at 7900 psi both of these show a lower pressure than the data I see for a 1 1/4 @ 1250fps bismuth load which is what RST sent me.