Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
So I took apart one of these RST 2 5/8" loads using a mic it looks like you need 1" of wadding or such to bring 1 1/4oz of shot up to where you need it for the roll crimp.Looks like the easiest method would be just use two 1/2" fiber wads . Back in the day didn't they fill the cases with as much wadding as was needed ? Some of these 8 gauge loads only have a single 1/4" fiber wad with 2oz of shot.
Hybrid Mode