Shell Recommendation

[mobirdhunter]

If you cannot get your chambers measured, 2 1/2" would work. No need for the added expense of 2 inch shells. I'm not sure when Parker started boring 2 3/4" chambers, but your gun would be close to that timeframe. Generally, they had 2 5/8" around the time of your gun, but to be sure, you should get them measured. Galazan sells an inexpensive drop-in gauge, and since you are bound to add to your collection (), you'll eventually need one.

As already recommended, lighter loads with moderate speeds should be okay, assuming your gun is sound. Many older guns have had things done to them over time, as I'm sure you know, so getting a good, qualified appraisal is important.

Good shooting with your new Parker. Post some photos of your gun and some of the game you shoot and places you hunt.

[Joe from MO]

Originally Posted by Garry L Gordon

If you cannot get your chambers measured, 2 1/2" would work. No need for the added expense of 2 inch shells. I'm not sure when Parker started boring 2 3/4" chambers, but your gun would be close to that timeframe. Generally, they had 2 5/8" around the time of your gun, but to be sure, you should get them measured. Galazan sells an inexpensive drop-in gauge, and since you are bound to add to your collection (), you'll eventually need one.

As already recommended, lighter loads with moderate speeds should be okay, assuming your gun is sound. Many older guns have had things done to them over time, as I'm sure you know, so getting a good, qualified appraisal is important.

Good shooting with your new Parker. Post some photos of your gun and some of the game you shoot and places you hunt.

My 1927 12ga VH 1 1/2 frame, has 2 3/4" chambers.... I had a Trojan that was one year older, and it had 2 1/2" chambers.... What I don't know, is if a former owner of the VH had chambers increased to 2 3/4", or if it came that way originally. Chamber length is not mention in my Parker Letter for it.

I shoot RST's out of it mostly, or the herters low recoil target loads. As for Bismuth, most of the factory Bismuth loads are 1350ish fps and too heavy IMHO for use in the VH. I do believe BOSS will make low pressure bismuth loads for you during normal times, right now I'd guess that's a hard one to get though.

After that, If you reload, reload your own low pressure bismuth for it.

[Researcher]

For the first fifty or sixty years of your guns life, if it was being hunted, it probably saw plenty of these high velocity 1 1/4 ounce loads.

Early Super-X 12-ga box, Super Excellant.jpg

Second style 12-gauge Super-X picture side 5.jpg

NITRO EXPRESS 12-gauge, Long Range Game Loads.jpg

Peters-12-Gauge-High-Velocity-Teal-Box 03.jpg

LEADER 12-gauge 2 3-4 inch OVAL Load No. 4404C.png

[Mike of the Mountain]

I agree 100% with Victor. 1 oz max and under 1200 FPS. That's all I shoot hunting with my Parkers and Lefevers. As Victor said, it'll save your stock. That's because anything stiffer may cause damage to the head of the stock especially if it has a lot of oil soaked into it, is very dry (think dry rot) or has been repaired. The stocks are the biggest concern on our vintage guns.

You can reload your own spreaders too. RST spreaders are great shells but right now they are unavailable due to component shortages. Go to Ballistic Products and get your components and load them up!! I even have some #10 shot I use for mudbat spreaders. They are very effective and don't destroy the bird.

One other item, RST does have some 12g bismuth shells in stock. You can find them on their website.