1917 Parker Single Barrel Trap Manufacturers Choke

[Bill Murphy]

You probably determined that a Parker trap gun was made with a cylinder choke because you did not measure the bore and choke with a proper tool. You need to get farther along in your shotgun education and measuring tools. A Parker trap gun with an original bore of .745 or .750 and a choke of .030 will measure a very light choke on a cheap choke gauge. Get a bore micrometer and report back.

[Gary Doyle]

Thank you both for the quick reply!

1) A Parker SBT 1917 is listed for sale with a 32" barrel and cylinder choke
bore. Therefore, I do not have access to measure it myself.

2) I was seeking information if Parker would have manufactured the gun with a
cylinder choke?

3) I have a small collection of the early American SBT guns and most all are
full choke.

[Bill Murphy]

I gave you a good answer. A Parker could have been made in any choke, but a bore micrometer will tell you the truth. Some sellers have no idea what they have, and that includes big name dealers. A PGCA letter may tell you if some rare choke was original equipment. There is a lot of PGCA information on 1917 Parker single barrels. What is the serial number of the gun you are interested in?

[Gary Doyle]

Thank you Mr. Murphy

I will email the seller and ask them to measure the choke, if they have an accurate tool.

[Gary Doyle]

The serial number is 177324

[Bill Murphy]

Thank you. That's a really low number.

[John Davis]

Heavy odds favor that any Parker SBT started life with some degree of Full choke. Very unlikely that it would originally have been Cyl. But possible I suppose.