Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Randy,
Thanks for the information. I will submit for a research letter and hopefully get more information. I did join as you suggested. Thanks for your help. Any ideas on getting barrels to lock onto receiver?
Welcome aboard Kevin. I am sure you will find a wealth of info here and lots of good folks. Wish I could assist with your barrel issue but all I can do is recommend that you take it to a gunsmith which you should do anyway to have the barrel walls measured. On the home page in the tree on the left click on "Parker FAQ's" and item #1 under "General Parker Knowledge" will be a list of gunsmiths members have used and would recommend. You may be able to find someone in your area. Best of luck !
The Following User Says Thank You to Randy G Roberts For Your Post:
Hybrid Mode