Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
When you are finished and re-assemble, also take care. Start the screw with your fingers and run it in as far as you can with finger pressure. Tighten with the screwdriver. When you feel the screw getting tight, the tang should be flush with the wood. As you do the final tightening bring the slot in line with the long axis of the gun (indexing the screw) and stop there
It should look like this (borrowed off the grades tab)
Threaded Mode