Light load !

[Double Lab]

I've tried the 1/2oz. load in 12ga., first given to me by a friend, but could not get the crimp right. They worked well enough. Didn't feel like adjusting my machine but if this component shortage continues I may have to.

[Bill Jolliff]

Originally Posted by Daryl Corona

I've tried the 1/2oz. load in 12ga., first given to me by a friend, but could not get the crimp right. They worked well enough. Didn't feel like adjusting my machine but if this component shortage continues I may have to.

To get nice crimps for those 1/2 ounce loads using the CB 3/4 ounce pink wads (CB0175-12), I put a card board wad in the bottom before adding the shot. Those wads are 0.140" thick, 20 gauge diameter size. I get them from Craig Smith, Circle Fly wads in PA. They cost about a penny apiece purchased in quantity; ie 5,000.

Craig often goes to Ernie's shoot in June. Let him know and he will hand deliver them.

I use 14 grains of Alliant Extra Light powder and have had Tom Armbrust test them. Pressure around 5500 psi and the speed is around 1325 fps. Been loading them for 6 years.

Yep, that standard rule applies: put the shot in the right place.

[Bruce Hering]

Originally Posted by Bill Jolliff

To get nice crimps for those 1/2 ounce loads using the CB 3/4 ounce pink wads (CB0175-12), I put a card board wad in the bottom before adding the shot. Those wads are 0.140" thick, 20 gauge diameter size. I get them from Craig Smith, Circle Fly wads in PA. They cost about a penny apiece purchased in quantity; ie 5,000.

Craig often goes to Ernie's shoot in June. Let him know and he will hand deliver them.

I use 14 grains of Alliant Extra Light powder and have had Tom Armbrust test them. Pressure around 5500 psi and the speed is around 1325 fps. Been loading them for 6 years.

Yep, that standard rule applies: put the shot in the right place.

Bill: Are these 2.5" or 2 3/4" shells ?

Thanks in advance

[Bill Jolliff]

Originally Posted by Bruce Hering

Bill: Are these 2.5" or 2 3/4" shells ?

Thanks in advance

Bruce,

The info above are for 2 3/4" hulls.

I also load 12 gauge using RST 2 1/2" hulls with 1/2 ounce of shot. For those, I use the CB6100-12 neon green wad, same card wad and same powder load: 14 grains of XL. Speed a little lower tho.

And Daryl, if you'd like to try a few of those loads, I'll send you some of those Circle Fly card wads. Bruce too.

Also Daryl, I load using RST 20 gauge 2 1/2" hulls using Alliant 20/28 powder in 1/2 ounce in that lovely and svelte 20 gauge Sterlingworth you sold me at Ernie's a couple years ago. Rest assured, she has a good home. And she's still just as pretty.

[Bruce Hering]

Originally Posted by Bill Jolliff

Bruce,

The info above are for 2 3/4" hulls.

I also load 12 gauge using RST 2 1/2" hulls with 1/2 ounce of shot. For those, I use the CB6100-12 neon green wad, same card wad and same powder load: 14 grains of XL. Speed a little lower tho.

And Daryl, if you'd like to try a few of those loads, I'll send you some of those Circle Fly card wads. Bruce too.

Also Daryl, I load using RST 20 gauge 2 1/2" hulls using Alliant 20/28 powder in 1/2 ounce in that lovely and svelte 20 gauge Sterlingworth you sold me at Ernie's a couple years ago. Rest assured, she has a good home. And she's still just as pretty.

Bill: Thanks for the info. Something else for me to play with....

[Mike of the Mountain]

Daniel, if you send me 5 or 6 flats of 3/4 and 7/8 oz shells, I'll be happy to try them. I'll even send you back the empties.