Winchester Super X Industrial 8 Ga Ammo

[Stan Hoover]

Originally Posted by edgarspencer

What type of wad do these loads use?

Edgar,
This is a picture of all of the components used in these shot shells, although I’m missing one pellet. Not sure what the powder is, what I didn’t lose while pulling it apart, weighed 29.1 grains.
Stan Hoover

[6pt-Sika]

Originally Posted by Stan Hoover

Edgar,
This is a picture of all of the components used in these shot shells, although I’m missing one pellet. Not sure what the powder is, what I didn’t lose while pulling it apart, weighed 29.1 grains.
Stan Hoover

I’d be curious to know the alloy of the buckshot . The three sizes I cast myself are generally plain old wheelweight alloy or at most water quenched wheelweights . I’ve not had an opportunity to try the 000000 but the 0000 and 00000 knock a deer ass over teacups if you do your part .

[Stan Hoover]

Originally Posted by CraigThompson

I’d be curious to know the alloy of the buckshot . The three sizes I cast myself are generally plain old wheelweight alloy or at most water quenched wheelweights . I’ve not had an opportunity to try the 000000 but the 0000 and 00000 knock a deer ass over teacups if you do your part .

Craig,

I'd be glad to show you some or maybe you would be interested in all the buckshot for reloading purposes?

I plan to be at the Southern.

Stan

[6pt-Sika]

Originally Posted by Stan Hoover

Craig,

I'd be glad to show you some or maybe you would be interested in all the buckshot for reloading purposes?

I plan to be at the Southern.

Stan

Bring some with you I’d atleast like to look at it ! I’ll bring a few 00 Hornady pellets and a couple of my cast 0000 and a pair of large channel locks to squeeze them in comparison . I wish I had a hardness gauge but I don’t . Still squeezing or checking hardness won’t tell us the alloy .