Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I'm betting you did not get the safety lever inside the jacket, part 28, into the notch in the safety slide spring, part 30. This would obviously prevent the safety lever from moving forward. One has to line that up as one is putting the wood onto the top tang.
Then before you assemble anything else make sure as you move the safety the lever moves at the bottom before installing the floor plate and other items.
Go to the home page and on the left go to Technical Information to see the parts.
The Following User Says Thank You to Jerry Harlow For Your Post:
Threaded Mode