Opinions on Ithaca NID gr2 16ga.

[Kevin McCormack]

Joe, the person who did that to your trigger guard HAS to be related to the moron who did the exact same thing to the guard on my 16 ga. 0 frame AH Damascus gun - there would be a perfect DNA sequence match between the two of them!

[Researcher]

If that is a proper, period correct, recoil pad with the legend "PAT. APPL'D FOR" at the bottom of the logo on the face --

00001. Ithaca Bridge Trestle pads.jpg

I'd do everything possible to save it. The repros are of the post war style with the word "PATENTED". From its introduction in 1932 through the end of NID production in 1948, the Ithaca "Bridge Trestle" Pad was only offered in the medium size. NID Magnum-10s, if found with an original recoil pad, usually have a seven-slot Jostam Anti-Flinch or a 15-heart Hawkins. By 1950, when they changed to the aluminum base of the pad it was offered in medium and large. The repros from Kings Ferry were offered in both sizes.

Have you had a chance to weigh your new toy? I have a similar 1941 vintage No. 4E, 16-gauge, 26-inch, ic & mod, that is quite the little chunk at 7 pounds 2.6 ounces.

[Joe from MO]

Originally Posted by Dave Noreen

If that is a proper, period correct, recoil pad with the legend "PAT. APPL'D FOR" at the bottom of the logo on the face --

Attachment 91883

I'd do everything possible to save it. The repros are of the post war style with the word "PATENTED". From its introduction in 1932 through the end of NID production in 1948, the Ithaca "Bridge Trestle" Pad was only offered in the medium size. NID Magnum-10s, if found with an original recoil pad, usually have a seven-slot Jostam Anti-Flinch or a 15-heart Hawkins. By 1950, when they changed to the aluminum base of the pad it was offered in medium and large. The repros from Kings Ferry were offered in both sizes.

Have you had a chance to weigh your new toy? I have a similar 1941 vintage No. 4E, 16-gauge, 26-inch, ic & mod, that is quite the little chunk at 7 pounds 2.6 ounces.

Gun weighs in at 6lb 7.03 oz. About 7oz heavier than my Philly Fox 16ga.

And, yes it has the period correct Butt pad, and is in decent shape and will be saved. I just need to glue the top and bottom that has separated about 1" on each end. Other than that, it's in very good condition for a 1938 but pad. I store the gun horizontally, so it should remain in good condition while I own it.

[Joe from MO]

Originally Posted by Kevin McCormack

Joe, the person who did that to your trigger guard HAS to be related to the moron who did the exact same thing to the guard on my 16 ga. 0 frame AH Damascus gun - there would be a perfect DNA sequence match between the two of them!

Did you fix it, or just consider it as part of the history of the gun, no matter how ugly that history may be.... The ONLY thing I can think of as to why, the guy had big fat hands. Doing this allowed for a bigger finger in the trigger guard, and a bigger hand between back of trigger guard, and bottome of grip..... Other than that, I cannot fathom why anyone would willingly take a drill to an Ithaga G2 trigger guard....