Safety Lever and Safety Lever Sleeve Needed

[Dean Romig]

"All's well that ends well."

Mark - That's how it should work... not by bidding against each other but by sharing the wealth.

...No, I'm not a socialist but I do believe in taking care of each other for the common good.

[Smoothebore]

Paul, Is this your only Parker? I ask because if you have another as an example, These parts are fairly easy to make with a grinder and a drill. Several years ago I saved a similar GH. It had a replacement stock and no safety parts inside. The lever and sleeve is not really very high tech. It's just a lever that connects the safety slide, and when the safety is on, it swings into position to block the trigger blades from engaging the sears. It's more a matter of the angle that it is inletted into the stock, than the refinement of the lever itself. The jacket is just a sheet metal sleeve to wedge it into the stock so the lever swings freely. Sorry, I used to have some pics of it before my hard drive died a couple years ago.

Dave

[Pauly B.]

It is unfortunately, my only Parker, so I don't have a template to work from. If I don't find one, hopefully, eventually I will be able to buy another Parker and make one.