Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Cameron, take a 1/2" wood dowel 4" long. Drill a 1/8"hole in the center of the dowel 1/2" deep. Now take a 4-40 or 5-40 screw at least 1-1/4" long and generate a 1/2" radius using a propane torch. Epoxy the screw in the dowel and allow it to cure. Its ready for use. The die sinker file I use is German and will set you back about $40. Mine was given to me. I would not recommend the cheap Chinese die sinker files for mullered borders.
Threaded Mode