Shotgun Barrel Cleaning Cradle?

[Jim McKee]

Anything like this available?
Thanks!
Jim

[Kensal Rise]

Mr. McKee:
In association with Kirk Merrington, we once offered a fixture like this. If such is what you are thinking of:

[6pt-Sika]

FWIW , if I really need to scrub the bore I put two pieces of wood inside the jaws of my bench vice and tighten it up on the barrels and then scrub away .

[Jim McKee]

Kensal Rise
Yes something like that, unfortunately no long made?
Jim

[Kensal Rise]

No. Not available generally any longer. But I might have enough bits to put ONE together. Maybe. But it would be $200 delivered IF I have the bits...

[MD*GSP]

I use one of these, but it looks like some models might be backordered.

https://www.berrysmfg.com/category/v...rsacradle-main

[Dean Weber]

I use a vise similar to this. It has rubber attached to the wood jaws. Jaws swivel and allow a stable platform on unsymmetrical items as well. Align the SxS barrels as an O/U. Very slick. Other companies sell the same. Just look for the wood jaws with rubber.

https://www.garrettwade.com/exceptio...iABEgI8lPD_BwE

[edgarspencer]

I guess I'm old fashioned.

[Phil C]

I bought this homemade one at a gun show about 10 years ago. Works great.

[edgarspencer]

Originally Posted by Dean Weber

I use a vise similar to this. It has rubber attached to the wood jaws. Jaws swivel and allow a stable platform on unsymmetrical items as well. Align the SxS barrels as an O/U. Very slick. Other companies sell the same. Just look for the wood jaws with rubber.

https://www.garrettwade.com/exceptio...iABEgI8lPD_BwE

Same vise. Quite a bit less expensive https://www.infinitytools.com/carver-s-vise